TM 2580 G High Gloss PVC Multifunction Positive and Vacuum Membrane Press Machine

TM 2580 G High Gloss PVC Multifunction Positive and Vacuum Membrane Press Machine

 

Multifunction Membrane Press Machine for High Gloss PVC  

 

Function:

Paste PVC Membrane .Wood Veneer ,especially high gloss PVC .on PVC door .Wood Door .Cabinet .and other related furniture .

The Big Design Highlights is doing High Gloss PVC .will protect the color of High Gloss PVC .and make the product perfect .

 

 

Features:

1. The whole machine adopts Germanic technology and the operation is stable and mature.

2. Hydraulic pressure system uses original components, which is safe and reliable and the technology is of good quality.

3. Energy saving compressed air tank is of new type and super large size with considerably great pressure.

4. PLC control interface operation system  originally from Japan with advanced technology and highly automatic.

5. Adopt Germany technology Vacuum Pump,  features strong horsepower, reliable and fast recorery.

6.The Heating system adopts Germanic strip heater technology .---efficient energy .

7.Energy saving compressed air tank .and be with considerably great pressure.

8.TM2580G is mainly used in Pasting High Gloss PVC on the surface of furniture.

 

Noted:

Working plate size: 2580mm×1270mm(inner size)  .Two Working Zone.

 

TM2580G make perfect high-glass board. If want to keep the brightness of high-glass PVC without losing, have to finish it within 91℃, once over this, it will lose maturely. But in this degree, PVC hasn’t soften enough to finish vacuum adsorbing, so need load a big pressure to shape the media-soft PVC. And heat is from up board, temperature of the work piece edge is low, so by add a “lower heating” to rise the temperature of edge, then improve PVC softened to finish perfect shaping. Meanwhile, vacuum shaping glue needs heat to activate for bonding, for now there are 2 kinds: single component (60 degree) and double components (80 degree).for promising quality, suggest to take double components glue, so the temperature of working piece edge cant be too low, which should be the range 80-91℃, “lower heating” can assist finishing.(Due to those above, suggest make high-glass by plate or simple design)